- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高额定电压小感应电流可靠性应力测试仪(耐焊弧可靠性应力测试仪)-(计算出来机操控)
High voltage low current tester (arc resistance tester) - (computer control)
企业产产品公司名称:耐电弧试验机
Product name: electric arc resistance tester
品牌型號:NDH-A
Product model: NDH - A
充分考虑标准规范:GB/T 1411-2002《粉末状耐压板材耐高低平瞬时电流脉冲自放电的经过多次实验发现》(等同于IEC 61621-1997)及ASTM D495等规范的规范要求设计的概念研制的,并适合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
主要是可用范围图及技能:
本试验装置机是通过APP于同步电机、电器设备落球回弹试验仪,介电击穿强度测定仪和挂式电器设备落球回弹试验仪,介电击穿强度测定仪等业内的低压电工用氟塑胶、不饱和聚酯树脂胶和电隔绝带层漆等电隔绝带层建材的耐弧光稳定性评判,主用作胶体电隔绝带层建材如:氟塑胶、溥膜、不饱和聚酯树脂、云母片、卫浴陶瓷、玻璃钢、电隔绝带层油、电隔绝带层漆、纸箱等材质的耐弧光稳定性检验;
本试验台机由测算机管理启动,也可以屏幕上显示某个测试操作环境及测试操作期限,测试操作收尾后并保持某个测试操作数剧,并可彩印.规格实验设计通知单。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 远程服务器为横竖一体机机构,底端为进行操作体统,上侧为校正箱。
2 本物品运用*新智能化有效控制方法,依据选用系统(IEC或ASTM)可自主完成试验报告,并在电脑主机上屏幕上显示做实验的时候进程和效果。
3 **性能指标保持良好,抗干扰信号功能强,检查精密度较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断時间精度:小于等于 ±10ms
2 调压器使用量:2kVA
3 特殊耐压试验电流:12.5kV
4 实验室检测直流电压误差:±3%
5 交流电操控精密度:±10% 电压电流测试精确度:1.5%
6 电极片对样品压力值:(0.5±0.05)N
7 电级相关材料:钨棒
8 工业长度:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 在使用学习环境温差:(23±2)℃
10 安全使用的环境温度:(50±5)%
11 电源模块:220V±5% 50Hz
12 试验报告 手段: 行业标准/美标/10 mA 间断性/20 mA 连续性/30 mA连继/40 mA接连
13 实验步骤下面:
| 步骤段 | 电弧放电工作电流 mA | 电孤通断的时间s | 各系统软件段持继期限s | 冲击试验总耗时s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 反复通 | 60 | 240 | |
| 5 | 20 | 连着通 | 60 | 300 | |
| 6 | 30 | 维持通 | 60 | 360 | |
| 7 | 40 | 连着通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 数字序号 | 英文名称 | 比例 | 提示 |
| 01 | 耐焊弧软件检测仪 | 单台 | |
| 02 | 工业平台 | 一项 | |
| 03 | 电极材料支承 | 两套 | |
| 04 | 24v电源线缆 | 设计一套 | |
| 05 | 跨接放** | 即使 | |
| 06 | 电流大小毫安表 | 几台 | |
| 07 | PC电脑测控軟件 | 几套 | |
| 08 | 试板架 | 一根 | |
| 09 | 金属电极距离感标块 | 2块 | |
| 10 | 坡度规则块 | 2块 | |
| 11 | 陶瓷图片片 | 2片 | |
| 12 | 喷墨打印文件机 | 1台 | 企业 |
| 13 | 求算机 | 1台 | 国产品牌 |
| 14 | 选用解释书 | 1份 | |
| 15 | 登记证证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 物料产品类别:
NDH-A 耐电弧放电应力测试仪-微机操作
NDH-B 耐脉冲经过多次实验发现仪-触摸式屏把控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!